- ECL 1
- Hewlett-Packard Company I, (A) Mechanical Design of Coaxial Microwave Connectors, (B) History of Coaxial Microwave Connector Design, K.H. Vesper, 1964, (C) Commercial Development of the Sexless Connector by Amphenol Corporation,
Sue Hays,
1967.
- ECL 2 to 7
- International Business Machines Corporation, 2 Note on Punched Cards, 3(A) IBM and the Computer Industry, 4(B) Making the IBM 514 Card Punch Go Faster, 5(C) Description of the IBM 1402 Card Punch, 6(D) Need for a New Automatic Card Punching Machine, 7(E) Expected Design Problems on the Serial Punch,
B. Roth, K.H. Vesper,
1964.
- ECL 8
- Task Corporation I, Hiring Engineers and Draftsmen,
K.H. Vesper,
1964.
- ECL 9 to 11
- Urban Transit, 9(A) Urban Transportation and the San Francisco Peninsula, 10(B) Hybrid Automobile-Helicopters, 11(C) Human Factors in a Hybrid Automobile-Helicopter,
J.M. Leslie, K.H. Vesper,
1964.
- ECL 14
- Task Corporation II, Failure of a Ball Bearing,
K.H. Vesper,
1964.
- ECL 15
- Hewlett-Packard Company III, (A) Drill Jig Design for a Structural Plate, (B) Drill Jig Tolerances,
P.Z. Bulkeley, E. Echterling,
1964.
- ECL 17
- FMC Corporation, (A) Need for a Rice Sorter, (B) Rice Sorter Layout, (C) Mechanical Failures in a Rice Sorter, (D) Rice Sorter Redesign,
K.H. Vesper, J.K. Williams,
1964.
- ECL 18
- Oxford Laboratories, Prothrometer Design,
R.H. McKim, J.K. Williams,
1964.
- ECL 19
- Hewlett-Packard Company II, Mechanical Design of a Rotary Vane Microwave Attenuator,
P.Z. Bulkeley, E. Echterling, Revised by Sue Hays,
1967.
- ECL 20
- Hewlett-Packard Company IV, Component Layout of an Electronic Signal Analyzer,
P.Z. Bulkeley, E.Echterling,
1964.
- ECL 21
- Hiller Aircraft Company I, Preliminary Design of a Light Observation Helicopter,
P.Z. Bulkeley, E. Echterling,
1964 Revised 1968 by Richard C. Bourne..
- ECL 22
- Data International I, A Portable Sawmill,
P.Z. Bulkeley, R.D. Regier,
1964.
- ECL 23
- Guy F. Atkinson Company, Clearance Between a Conveyor and Support Tower,
H.O. Fuchs, R.D. Regier,
1965 Revised 1968 by Richard C. Bourne..
- ECL 24
- Short Design Cases, (A) Patient Room Door Handles, (B) Opening Sliding Glass Doors, (C) Surgical Instrument Cabinet Doors, (D) Label Dispenser Design,
R.H. McKim, J.K. Williams,
1965.
- ECL 25
- Philco Corporation I, (A) Satellite Tracking and Commanding Console Layout, (B) Student Console Layout Solution, (C) Panel Evaluation and Testing,
R.H. McKim, J.K. Williams,
1965.
- ECL 27
- Radonics, Inc., (A) Need for a Heliarc Welding Fixture, (B) Design of a Heliarc Welding Fixture, (C) Present State of the Heliarc Welding Fixture,
K.H. Vesper, E.J. Echterling,
1965.
- ECL 28
- Hiller Aircraft Company II, (A) Design of a Supercharger Inlet Duct, (B) Filter Housing Clearance Considerations, (C) Structural Bracket Design, (D) Engine Shroud Design,
P.Z. Bulkeley, H.O. Fuchs, E.J. Echterling,
1964.
- ECL 29
- Analysis of Cloud Chamber Photographs,
P.Z. Bulkeley, R.D. Regier,
1964.
- ECL 30
- Radiation Products Company, Failure of a Rotating Mirror,
H.O. Fuchs, J.K. Williams,
1965.
- ECL 31
- Precision Instrument CORPORATION< Experience with a Tape Reel Hold-down Mechanism,
H.O. Fuchs, R.D. Regier,
1965.
- ECL 33
- Dr. J.H. Laub, Development of a Flowmeter,
J.H. Laub, E.J. Echterling,
1965.
- ECL 34
- H.O. Ireland, Lewistown, Illinois, High School Foundation Design,
H.O. Ireland, E.J. Echterling,
1965.
- ECL 35
- William Wohlfort, Design of a Variable Frequency Oscillator,
R.E. Miller, W. Wohlfort,
1965.
- ECL 36
- J.L. Adams Corporation, Areas for Improvement in Functional Artificial Arms,
K.H. Vesper, D.A. Horine,
1965.
- ECL 37
- Allied Solid Rocket Corporation,
E.J. Fisher,
1965.
- ECL 38
- Dymo Industries, Inc., Design of a Tapewriter Component,
H.O. Fuchs, J.A. Alic,
1965.
- ECL 39
- Rucker Company, (A) A Centrifuge Project, (B) Inertia Starter for the Centrifuge, (C) Centrifuge Clutch Design,
H.O. Fuchs, O. Lorentsen, A. Krauter,
1965.
- ECL 40
- American Tractor Equipment Corporation. (A) Development of a Parallel Lift Ripper, (B) Testing of a Parallel Lift Ripper, (C) Corrective Design for a Ripper Draft Frame Failure,
H.O. Fuchs, D.A. Horine,
1965.
- ECL 41
- Hughes Tool Company, Aircraft Division, Development of a Light Observation Helicopter for the United State Army,
K.H. Vesper, E.J. Echterling,
1965.
- ECL 42
- Gar Wood Industries, Inc., Failures at Welded Joints in a Hopper Trailer,
H.O. Fuchs, J.A. Alic,
1965.
- ECL 43
- Peterson Tractor Company, Design of a Side Sloper,
H.O. Fuchs, J.A. Alic, 1965. Revised by Richard C. Bourne,
1968.
- ECL 44
- Dynasham Truck Company, Ltd, Truck Suspension Bolt and Busing Failures,
H.O. Fuchs, J.A. Alic,
1966.
- ECL 45
- Marvetti, Inc., Design and Development of a Printing Calculator,
H.O. Fuchs, J.A. Alic,
1966.
- ECL 46
- Beckman and Whitley, Inc. I., Design of a 16mm Portable News Film Camera,
H.O. Fuchs, D.A. Horine, 1966. Revised by Richard C. Bourne,
1968.
- ECL 47
- Systron-Donner Corporation, Design of an Analog Computer,
H.O. Fuchs, J.A. Alic,
1966.
- ECL 49
- Zamcon Corporation, Design of a Steam Turbine Bearing Cover,
H.O. Fuchs, J.A. Alic,
1966.
Electronic availability: Case Review.
- ECL 51
- Travaglio Engineering Company, Manufacturing Design for a Cycle Timer,
R.E. Keller,
1966.
- ECL 52
- Development of A Dynamic Seal at Beckman Instruments, Inc.-Spinco Division,
William J. Clemens, David Horine,
1967.
- ECL 53
- Ford Motor Company, Design of an Automatic Welding Machine,
J.A. Alic,
1968.
- ECL 54
- Beckman and Whitley, Inc. II, Design of a Mirror Mount,
H.O. Fuchs, D.A. Horine, 1966. Revised by Richard C. Bourne,
1968.
- ECL 55
- John Laub-JPL, Development of Elastic Orifices for Gas Bearings,
J.H. Laub,
1966.
- ECL 57
- Lawrence Radiation Laboratory, An Ultra-High Vacuum Flange Seal,
K.H. Vesper, J.A. Alic,
1966.
- ECL 58
- Simular, Inc., Mechanical Design in a Radar Simulator,
K.H. Vesper,
1966.
- ECL 59
- Stanford Linear Accelerator Center I, (A) Development of a Remotely Operable High-Vacuum Coupling, (B) The SLAC Design, (C) Ring-Spring Analysis and Load Spring Design Problems, (D) Coil Spring Design, (E) Material Selection, (F) Ring-spring Material Selection and Casting Problems,
J.A. Alic,
1966.
- ECL 60
- Art Whiting, To Weigh A Man In Space,
K.H. Vesper,
1966.
- ECL 61
- Stanford Linear Accelerator Center II, Beam Pipe Cooling System,
J.A. Alic,
1966.
- ECL 62
- General Electric Company, Vallecitos Atomic Laboratory, Ventilation Exhaust Stack,
P.A. Bulkeley, D.A. Horine, Revised by Sue Hays,
1967.
- ECL 63
- Data International II, Voltage Regulation,
J.W. Hill,
1966.
- ECL 64
- Data International III, Electrical Appliances,
J.W. Hill,
1966.
- ECL 67
- Hewlett-Packard V, Microwave Switch,
W.E. Bullock, J.W. Hill, G.R. Powley,
1966.
- ECL 68
- Ampex Corporation, Tape Recorder Capstan Shaft,
K.H. Vesper, J.A. Alic,
1966.
Electronic availability: Case Digest,
Case Digest,
Instructor's Notes,
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl68d.txt (Digests+Notes (ASCII text, no graphics)),
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl68d.wp (Digests+Notes (WordPerfect, with graphics)).
- ECL 69
- City of San Jose-IBM Corporation, Computerized Traffic Control,
D.O. Covault, G.A. Fleischer, P.F. Williams,
1966.
- ECL 70
- Bechtel Corporation, Process Analysis and Optimization of a Desalting Plant Design,
J.W. McCutchan, R.P. Vail, E.N. Ziegler,
1966.
- ECL 71
- Improving Odometer Reliability at Stewart-Warner Corporation,
H.T. Gencsoy,
1969.
- ECL 72
- Varian Associates, Redesign of a Liquid Nitrogen Container,
William S. Chalk, Ivan A. Shirk and Robert B. Thornhill,
1967.
Electronic availability: Case Review.
- ECL 73
- Switching a Tracking Antenna,
Sue Hays,
1968.
- ECL 74
- U.S. Bureau of Reclamation, Hunting Problems of a Dam Control Gate,
K.H. Vesper, W.J. Clements,
1966.
Electronic availability: Case Review.
- ECL 76
- Precision Instrument Company, Modification of a Portable Video and Broadband Instrumentation Recorder,
Karl H. Vesper and William H. Clemens,
1967.
- ECL 77
- Hendrik Van Ark - Request for a Bridge Design,
Karl H. Vesper,
1967.
- ECL 78
- Hewlett-Packard VI, Signal Generator Read-Out Design,
Karl H. Vesper, Robert Beardmore and Charles Fernald,
1967.
- ECL 79
- Chaparral, Bolt Failure on a Racing Automobile,
Henry O. Fuchs and William H. Clemens,
1967.
Electronic availability: Case digest,
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl79d.txt (Case digest (clear text)),
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl79d.wp (Case digest (WordPerfect, with graphics)).
- ECL 80
- Consolidated Dynamics Corporation, Fracture of a Marine Gear Rim,
William H. Clemens,
1968.
- ECL 82
- Design of an Electron Beam Dump at Stanford Linear Accelerator Center,
Munir R. El-Saden,
1967.
- ECL 87
- Design of a Creme-Lite Mixer,
Geza Kardos,
1969.
- ECL 88
- Designing a Transformer,
William H. Clemens,
1968.
- ECL 89
- Development of the Mariner C Solar Panel Deployment System at Jet Propulsion Laboratory,
Sue Hays,
1967.
- ECL 90
- Shielding a Toroid Amplifier at Stanford Linear Accelerator Center,
Sue Hays,
1967.
- ECL 91
- Girder Alignment at Stanford Linear Accelerator Center,
Henry O. Fuchs and Sue Hays,
1968.
- ECL 92
- Design and Fabrication of a Seawater Test Chamber,
Karl H. Otte and Otto E. Widers,
1967.
- ECL 93
- Design of a Compact Air Driven Impact Wrench at Skil Corporation,
Richard Thompson and Robert Wickham,
1967.
- ECL 94
- Development of a New Drill Steel at Ingersoll-Rand Company,
H.O. Fuchs and Ronald J. Shuman,
1967.
- ECL 96
- Development of an Undersea Power Supply at Aerojet General Corporation,
William J. Clemens,
1967.
- ECL 98
- Integrated Distributed Amplifier at General Electric Company,
Homi D. Gorakhpurwalla,
1967.
- ECL 99
- Tone Signalling at Motorola Incorporated,
Luther E. Johnson,
1967.
- ECL 100
- Pump Plunger Improvements at Kobe Inc.,
Robert Martin,
1969.
- ECL 101
- Ernie Kossick: Slowing a Universal Electric Motor,
Karl Vesper,
1968.
- ECL 102
- Shutter Drive Application of Ferguson's Paradox,
Aaron Baumgarten,
1968.
- ECL 103
- Space Crank Application,
Aaron Baumgarten,
1968.
- ECL 106
- Forage Blower Development at International Harvester,
Ibango Ekong and Rollin C. Dix,
1967.
- ECL 107
- Benefit-Cost Analysis Applied to Air Pollution Control,
G.A. Fleischer,
1968.
- ECL 108
- Three Problems at Apex Electronics,
S.F. Love,
1969.
- ECL 109
- Development of a High Speed Weighing Machine at FMC,
Sue Hays,
1969.
- ECL 110
- A Problem in Cyclone Engineering,
R. Martin,
1969.
- ECL 111
- Design of a Hand Operated Film Drive Mechanism,
John Sondeno,
1969.
- ECL 112
- Keith McFarland: Removing Pincushion Distortion in a Cathode Ray Tube,
Charles Fernald,
1968.
- ECL 113
- The Go-Matic Accessory for Motorcycles,
Prem Garg,
1969.
- ECL 114
- Development of a Circular Strike Plate at Schlage Lock Company,
Richard C. Bourne,
1968.
- ECL 115
- Design of a Scotch Yoke Mechanism,
Aaron Baumgarten,
1969.
- ECL 120
- Harvey La Branche: Spring Failures in a New Toy Rifle,
Karl H. Vesper,
1968.
- ECL 121
- Development of an Aspirator,
Thomas J. Zilka,
1969.
- ECL 122
- Terry Abbey: Pumping Waste Acid Deep Underground,
Karl H. Vesper,
1986.
- ECL 124
- Warren Deutsch: Design of a Satellite Controlling Instrument Panel,
Mitchel Blanton,
1968.
- ECL 126
- Plastic Pipe Saddle Design,
Prem Garg,
1969.
- ECL 127
- Three Years to Design a Door,
Drew V. Nelson,
1969.
- ECL 129
- To Support a Mountain: Design and Development of a "Dynamic" Mine Prop,
R.B. McKee (Reprinted from UCLA EDP Report No. 6-64),
1964.
- ECL 131
- Jack Bristor: Open Channel Flow,
John D. Bristor,
1968.
- ECL 133
- Heron Road Bridge,
Geza Kardos,
1969.
- ECL 134
- Development of the Hy-Score Air Pistol,
Andrew Lawrence,
1969.
- ECL 135
- Problem of the Perverse Pinion,
Charles O. Smith,
1969.
Electronic availability: Part A - Problem Description,
Part B - Failure Analysis,
Appendix - Notes on Failure Analysis.
- ECL 137
- Design of a Centrifuge Rotor Cap,
P.C. Garg,
1969.
- ECL 138
- Electron Beam Collimator,
M.J. Lum,
1969.
- ECL 143
- Individuality Projected,
Michael Kelly,
1969.
- ECL 144
- A Special Testing Problem at IBM,
K.J. Waldron,
1970.
- ECL 145
- Locking a Thread in a Control Rod Drive,
James Thackrey,
1970.
- ECL 146
- Howard Ameson's Pool-Sweep,
P.C. Grag,
1970.
- ECL 147
- Automatic Transmission Development,
R.J. Shuman,
1970.
- ECL 148
- The Flippin' Motorbike,
C.O. Smith,
1970.
- ECL 149
- Design of a Ball Transfer Unit for Air Cargo,
R.K. Ganeriwal,
1970.
- ECL 150
- Drop Master,
R. Ganeriwal,
1970.
- ECL 151
- Underwater Pipeline,
Dean C. Ing,
1970.
- ECL 152
- Pickle Pasteurizer Shaft Failure,
B.M. Shawver and J. M. Henderson,
1970.
- ECL 153
- Irrigating a Rice Field,
Ralph J. Smith,
1970.
- ECL 155
- Red Heart at Interstate Brick Company,
Wayne Ross,
1970.
- ECL 156
- Positioning a Microwave Diode,
S. Hayes and R. Ganeriwal,
1970.
Electronic availability: Case Review.
- ECL 157
- Interfaces at Sterling Development Laboratories,
Sue Hays,
1970.
- ECL 158
- The Dual Spin Satellite Attitude Stabilization Concept,
Peter Likins,
1970.
- ECL 159
- Jumping a Derrick,
Ralph J. Smith,
1970.
- ECL 160
- Expansion of the Danville Pumping Plant,
James C. Collins,
1970.
- ECL 161
- Development of a Stainless Steel Trashrack,
R.J. Shuman,
1970.
- ECL 162
- Variable Stability System of the X-14A VTOL Aircraft,
J. Hill, G. Kardos, A. Winn,
1970.
- ECL 163
- Analysis of the Hydraulic Accelerator Machine Gun,
R.A. Hirsch,
1970.
- ECL 164
- Concrete Liquid Oxygen Reservoir,
H.C. Kornemann,
1970.
- ECL 165
- Introducing Stainless Steel Light Poles,
L. Anselmini,
1979.
- ECL 166
- Moving Map Display,
Geza Kardos,
1970.
Electronic availability: Case Review.
- ECL 167
- Methods of Lessening the Consumption of Steam, and Consequently of Fuel, in Fire-Engines,
Geza Kardos,
1971.
Electronic availability: Case Review.
- ECL 168
- Design and Development Bellows Restraint Unit,
P.J. Booker,
1971.
- ECL 169
- Spontaneous Fracture,
G. Kardos,
1971.
Electronic availability: Case Review.
- ECL 170
- Tortured Twist Drill,
C.O. Smith,
1971.
- ECL 171
- Time-to-Start,
Geza Kardos,
1971.
- ECL 172
- "THIS MUST BE DONE!",
Geza Kardos,
1971.
Electronic availability: Case Review.
- ECL 173
- The Cryogenic Meter,
H.C. Kornemann,
1971.
- ECL 174
- To Find a Bullet,
Geza Kardos,
1971.
Electronic availability: Case Review.
- ECL 175
- The case of the Methodist Chapel Failure,
P.F. Sanders,
1971.
- ECL 176
- Mechanical Hayhook Design,
J.M. Henderson,
1971.
Electronic availability: Case Review.
- ECL 177
- Fairdeal Construction Company,
Harold F. Holland,
1971.
- ECL 178
- Negligence,
Drew V. Nelson,
1971.
- ECL 179
- Sometimes It Gets Pushed,
Robert H. Todd,
1971.
Electronic availability: Case Review.
- ECL 180
- Ascendent Electric Company,
David P. Rutenberg,
1971.
Electronic availability: Case Review.
- ECL 181
- A Four Barrel Step-and-Repeat Camera,
Geza Kardos,
1971.
- ECL 182
- Short Cases on Production Methods,
W.E. Eder,
1971.
- ECL 183
- The Development of a Cast Monoform Turbine Wheel,
R.B. McCollough,
1971.
- ECL 184
- Arnold Ware's CRANE Accident,
R. Ganeriwal,
1971.
- ECL 185
- The Design of the Bart-AFC Barrier Drive System at IBM,
R. Piziali,
1972.
- ECL 186
- The Pickup-Head Link Failure,
R. Piziali,
1972.
- ECL 187
- Value Engineering Applied to an IBM Levelling Screw,
R. Piziali,
1972.
- ECL 188
- The Stun-Gun,
A.P. Shack and G. Kardos,
1972.
- ECL 189
- Laser Hardware,
Fred Moreno,
1972.
Electronic availability: Case Review.
- ECL 190
- The Isothermal Cup,
G.A. Sousa and T.W. Tesche,
1972.
- ECL 191
- My Design Philosophy,
Jack Ryan,
1972.
- ECL 193
- Accurate Location of Arcing Faults on Pipe-Type Underground Power Cables,
C.E. Prince,
1972.
- ECL 194
- Radial Load Flow Problems in Distribution Circuit Analysis,
C.E. Prince,
1972.
- ECL 195
- Research on Hybrid AC/DC Electric Power Systems and System Stability Techniques,
C.E. Prince,
1972.
- ECL 196
- Space Conditioning System for Electronic Associates Incorporated,
B.V. Viscomi,
1972.
- ECL 197
- Steady State Thermal Ratings for 220 KV Overhead Conductors,
B.V. Viscomi,
1972.
- ECL 198
- Transportation of Liquefied Natural Gas,
Sterling Beckwith,
1973.
- ECL 199
- Amphibious Vehicle Models,
Albert J. Nahas,
1973.
- ECL 200
- 150 Ton Pipe: Easier to Make Than to Move,
Albert J. Nahas,
1973.
Electronic availability: Case Review.
- ECL 201
- Design of an Improved Aircraft Seat,
R. Stephen Ball, William B. Goodman and William J. Kennish,
1973.
- ECL 202
- Manure Disposal with Electro-Hydraulic Controls,
Brian Foord,
1973.
- ECL 203
- Custom Cycle,
Albert J. Nahas,
1973.
- ECL 204
- Webster Mfg. (London) Limited,
G. Kardos,
1973.
Electronic availability: Case Review.
- ECL 205
- A Versatile Boom Helps CAT Mechanics,
Albert J. Nahas,
1973.
Electronic availability: Case Review.
- ECL 206
- Spectrac, Ltd.,
G. Kardos,
1973.
- ECL 207
- An Encounter with Deep Freeze,
W.E. Eder,
1973.
- ECL 208
- The Snotruk,
G. Kardos,
1973.
- ECL 209
- Back to Basics,
Albert J. Nahas,
1973.
- ECL 210
- The Fulminating Fire Extinguisher,
C.O. Smith,
1974.
- ECL 211
- The Delinquent Drawbar,
C.O. Smith,
1974.
Electronic availability: Case Review.
- ECL 212
- Air Force A-7D Brake Problem,
H.O. Fuchs,
1974.
- ECL 213
- Paul Hait and the Dental Unit,
D.N. Howse and G. Kardos,
1974.
- ECL 214
- Boom-Boat Drive and Steering System,
R.E. McKechnie,
1974.
- ECL 215
- Designing A Gantry for Kyung Won,
H.O. Fuch and S. Bae,
1974.
Electronic availability: Case Review.
- ECL 216
- Design of a Fast Reactivity Excursion Device,
by Messrs. Lew, Plimley and Wycoff,
1974.
- ECL 217
- The Design and Development of the Residual Heat Removal System-Susquehanna Steam Electric Station, Units 1 and 2,
by Messrs. Chong, Clark and Klee,
1974.
- ECL 218
- The Bumbling Bus,
C.O. Smith,
1974.
- ECL 219
- Difficulties with Modular Housing,
Geza Kardos,
1975.
- ECL 220
- The Trouble Light Recall,
Robert McLaghlin,
1975.
- ECL 221
- Thermal Fatigue and Instrument Design,
L. Rendall,
1975.
Electronic availability: Case Review.
- ECL 222
- Measuring Motor Torque-Speed Curves,
Geza Kardos,
1976.
- ECL 223
- The 3.5 Millimetre Sliding Load,
R. Sloss,
1976.
- ECL 224
- BART "Dead Train" Detection,
O. Baskind, N.Y.N. Chu, J.A. Palomo, and J.F. Rollings..
- ECL 225
- The Path to the Conception of the Junction Transistor,
IEEE,
1976.
- ECL 226
- The Troubled Truss,
C.O. Smith,
1977.
- ECL 227
- A Cement Mill Failure,
Andrew E. Samuel,
1977.
Electronic availability: Case Review.
- ECL 228
- Anatomy of a Patent,
Peter R. Ciriscioli, Stephen D. Cross and Yuen-Cjen Yong,
1977.
Electronic availability: Case Review.
- ECL 229
- The Aching Axle,
C.O. Smith,
1977.
Electronic availability: Case Review.
- ECL 230
- Diesel to Detritus,
C.O. Smith,
1977.
Electronic availability: Case Review.
- ECL 231
- Does Your Hammer Chip?,
J.F. Radavich,
1977.
Electronic availability: Case Review.
- ECL 232
- Crop Spraying Boom for Cessna 185,
Geza Kardos,
1977.
Electronic availability: Case Review,
Part A - Introduction,
Part B - Reproduction of Calculations,
Part C - Conclusion.
- ECL 233
- Camera Installation in Helio Courier Aircraft,
Geza Kardos,
1977.
- ECL 234
- International 500,
Geza Kardos,
1977.
Electronic availability: Case Review.
- ECL 235
- Engineer: My First Experience,
Michael Helmey,
1977.
Electronic availability: Case Review.
- ECL 236
- Conveyor Drop Gate Design,
Larry Wodnicki,
1977.
Electronic availability: Case Review.
- ECL 237
- Finite Elements Save Cylinders,
Anthony Metoyer,
1977.
- ECL 238
- The Sinking Floor,
B. Dennehy,
1978.
- ECL 239
- The Disappearing Streets,
B. Dennehy,
1978.
- ECL 240
- A Case Study on Shaft Design,
W.P. Lewis,
1978.
- ECL 241
- Intermediate Air Receiver Fracture,
W.E. Eder,
1978.
- ECL 242
- The Galloping Grain Grinder,
C.O. Smith,
1978.
- ECL 243
- The Bouncing Bottle,
C.O. Smith,
1978.
- ECL 244
- The Misanthropic Mixer,
C.O. Smith,
1978.
- ECL 245
- Enterprise Versus Bureaucracy,
Baker/Rendall,
1978.
- ECL 246
- Tip Tanks for the Super King Air,
R.D. Marwill,
1978.
- ECL 247
- The Design of a Synchronous Thinner,
H.M. Henderson,
1979.
- ECL 248
- To Pinch or not to Pinch,
C.O. Smith,
1979.
- ECL 249
- The Rambunctious Rim,
C.O. Smith.
- ECL 250
- Center Industries Corporation,
J.A. Alic,
1979.
- ECL 251
- Digging into Mars,
J.A. Alic,
1979.
- ECL 252
- Digging into Mars II,
J.A. Alic,
1979.
- ECL 253
- The Limp Ladder,
C.D'Antonio & C.O. Smith,
1981.
- ECL 254
- A Grate Problem,
P.M. Lima,
1981.
- ECL 255
- Two-Speed Coiler Gear Box,
G. Kardos,
1981.
- ECL 256
- Double Alkali Flue Gas Desulfurization: The CIPS Experience,
R. Myhre,
1983.
- ECL 257
- Standard Ladder Standard,
C.O. Smith,
1983.
- ECL 258
- The Magnetic Fusion Energy Engineering Act of 1980,
A. Flores,
1983.
- ECL 259
- Cellular Radio: The New Mobile Phone Technology,
S.W. Longwell,
1984.
- ECL 260
- The McGuire Reactor: A Case Study in Nuclear Reactor Licensing,
I.K. Fong,
1985.
- ECL 261
- Innovative Techniques for Managing Water Supply,
G. Imm,
1985.
- ECL 262
- Nuclear Fuel Cycle Reprocessing Policy: The Barnwell Nuclear Fuel Plant Experience,
P.L. Campbell,
1985.
- ECL 263
- Excessive Workplace Noise in the "Polymer" Department,
Darryl L. North,
1985.
- ECL 264
- My Aching Back,
C.O. Smith,
1985.
- ECL 265
- Indoor Air Pollution Migration Transport Mechanisms in High-Rise Buildings,
John W. Fothergill, Jr.,
1989.
- ECL 266
- How to Design, Manufacture and Install an Unsafe Blower System,
Robert K. Taylor,
1989.
- ECL 267
- Mechanical Power Press Safety Study,
T. Willis,
1989.
- ECL 268
- Human Factors in the Design of Machinery Controls,
Dr. Howard Gage,
1989.
- ECL 269
- Roaring Spring Foundry,
Robert Jennings Heinsohn,
1989.
- ECL 270
- A Disaster in the Making,
John Tarkov,
1989.
Electronic availability: Full report,
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl270.txt (ASCII Text),
ftp://ftp.carleton.ca/pub/civeng/ECL/ecl270.wp (Word Perfect).
- ECL 271
- It's The Pits,
C.O. Smith,
1990.
Electronic availability: Digest, Part A,
Digest, Part B,
Digest, Part C,
Instructor's Notes.
- ECL 272
- Saw Table or Table Saw?,
C.O. Smith,
1990.
- ECL 273
- Little Boys and Coffee Mills,
C.O. Smith,
1990.
- ECL 274
- The Runaway Sourcehead,
J.G. Gibson,
1990.
- ECL 275
- A Helicopter's Last Hop,
C.O. Smith,
1992.
- ECL 276
- Instructor's Guide for a Case on Transbus and the Advanced Design Bus: The Struggle for an Innovative Bus,
Adlynn Kustin,
1988.